QINGDAO YAOSEN MARINE EQUIPMENT CO.,LTD

JY5-44 type smelting exhaust fan

 

1. JY type smelting exhaust fume inducer is suitable for steelmaking and iron-making non-ferrous metal smelting. The maximum temperature is more than 250 ℃.

 

In order to reduce the dust content of the fume entering the fan, the dust removal device must be installed before the induced fan. According to the usage of the general steel plant, the dust removal efficiency must not be lower than 8585.

 

In order to reduce noise, the user can lay the sound insulation layer outside the fan according to the need.

 

2, form

 

1) the draft fan is made into single suction with 12 machine numbers of 16 ~ 31.5.

 

2) facing squarely from one end of the motor, the impeller rotating clockwise is called right-hand fan, expressed as "right", and impeller counterclockwise rotation is called left whirlwind machine, which is expressed as "left".

 

3) the air outlet position of the fan is expressed by the air outlet angle of the housing. "left" and "right" can be made into 0 degrees 45 degrees, 90 degrees, 135 degrees, 180 degrees and 225 degrees.

 

4) the fan drive mode is D type (D type) and F type (F2531.5), both of which are driven by elastic coupling.

 

5) the full name of the product is as follows:

 

JY5-44 v 24D right 225 °

 

JY5-44 28F left 45 °

 

3, the structure characteristic fan is mainly composed of impeller, housing, air inlet and intake chamber) regulating door and transmission part. Because of the larger volume of the series fan, it is delivered under the condition of disintegration. Installed by the user according to the data provided by the design institute or the wind turbine factory. According to the needs of the user, the hydraulic coupler can be installed between the motor and the fan to adjust the speed or limit the moment, so that the fan can start at low speed and ensure the safety and reliability of the equipment starting. Through stepless speed regulation to meet the requirements of variable working conditions to achieve the purpose of energy saving. In and out of the valve can also be installed electric actuator to control the valve switch to achieve remote automatic control.

We could Design and Produce the Marine fan,Industrial Fan,and Other Ventilation Equipment according to your detailed requirement !